sim apl [ < enable | disable > ] This command is used to return the status or enable or disable APL simulation on the device. Magnus_VLF THIS COMMAND SHOULD NOT BE USED ON FIELD MACHINES. By simulating some of the hardware found on the machine can cause very unexpected results, and possibly damage the device. This command is mainly only for testing, or for developers. This command is available. Expert 05-Oct-2006 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:25:32 2008 PST